Publications

SPE Papers Authored by Constien & Associates

  • C.C.Fischer, V.G. Constien and C.M. Vining: SPE 168202, “ Filtering Out More Information from Laboratory Screen and Gravel Pack Tests”, presented at the 2014 SPE International Symposium and Exhibition on Formation Damage Control held in Lafayette, Louisiana, USA, 26-28 February 2014.
  • C.C. Fischer and V.G Constien: SPE 168201-MS, “Practical Laboratory Testing for Shale Fracturing”, presented at the 2014 SPE International Symposium and Exhibition on Formation Damage Control held in Lafayette, Louisiana, USA, 26-28 February 2014.
  • E. Martch, A. Hudson, W. Bode, C. Fischer, and V. Constien: SPE 151865, "Fundamentals of Gravel Pack Performance with Mesh Screens," presented at the 2012 SPE International Symposium and Exhibition on Formation Damage Control held in Lafayette, Louisiana, USA, 15-17 February 2012.
  • R. Hodge, R. Burton, C. Fischer, and V. Constien: SPE 128060, “Productivity Impairment of Open-Hole Gravel Packs Caused by Drilling Fluid Filtercake,” presented at the 2010 SPE International Symposium and Exhibition on Formation Damage Control held in Lafayette, Louisiana, USA, 10-12 February 2010.
  • Vernon Constien: SPE 112497, “Formation Damage, Completion Impairment Following Dynamic Filtercake Deposition on Unconsolidated sand”, presented at the SPE International Symposium and Exhibition on Formation Damage Control, Lafayette, Louisiana, USA, 12-14 February 2008.
  • Vernon Constien and Valerie Skidmore: SPE 98363, “Standalone Screen Selection Using Performance Mastercurves”, presented at the SPE International Symposium and Exhibition on Formation Damage Control, Lafayette, Louisiana, USA, 15-17 February 2006.
  • Richard M. Hodge, Robert C. Burton, Vernon Constien, and Valerie Skidmore: SPE 73772, “An Evaluation Method for Screen-Only and Gravel Pack Completions:, presented at the SPE International Symposium and Exhibition on Formation Damage Control, Lafayette, Louisiana, USA, 20-21 February 2002.

SPE Papers Presenting Constien & Associates Test Data

  • R. Chanpura, R. Hodge, J. Andrews, E. Toffanin, T. Moen, M. Parlar: SPE 127931, “State of the Art Screen Selections for Standalone Screen Applications,” 2010.
  • G. Colwart, R. Burton, L. Eaton, R. Hodge, K. Blake: SPE 105542-PA, “Lessons Learned on Sand-Control Failure and Subsequent Workover at Magnolia Deepwater Development,” 2009.
  • A. Procyk, D. Jamieson, J. Miller, R. Burton, R. Hodge, N. Morita: SPE 109824-PA, “Completion Design for a Highly Compacting Deepwater Field,” 2009.
  • L. Rivas, G. Navaira, B. Bourgeois, B. Waltman, P. Lord, T. Goosen: SPE 116007, “Development and Use of High-Density Fracturing Fluid in Deepwater Gulf of Mexico Frac and Packs,” 2008.
  • Luke F. Eaton, W. Randall Reinhardt, J. Scott Bennett, Kenyon Blake and Hugo Morales: SPE 105541, “Magnolia Deepwater Experience – Frac Packing Long, Perforated Intervals in Unconsolidated Slit Reservoirs”, 2008.
  • T. Schneider, D. Uldrich, R. Hodge, B. Barree, M. Martin: SPE 106050-MS, “Horizontal Fracture Stimulation Success in the Alpine Formation, North Slope, Alaska,” 2007.
  • P.R. Adams, E.R. Davis, R.M. Hodge, R.E. Burton, L.B. Ledlow, A.D. Procyk and S.C. Crissman: SPE 110082, “Current State of the Premium Screen Industry; Buyer Beware. Methodical Testing and Qualification Shows That You Don’t Always Get What You Paid For”, 2007.
  • K. Wibisono, R. Burton, R. Hodge, R. Wijaya, B. Nieuwland, J. Cassidy: SPE 104119-MS, “Openhole Clean-up of Deep, High Temperature Horizontal Wells with a Chelant Based Acid System – Case Histories from Indonesia,” 2006.
  • E. Davis, D. Beardmore, R. Burton, J. Hedges, R. Hodge, H. Martens, C. Svoboda: SPE 96830-MS, “Laboratory Testing and Well Productivity Assessment of Drill-in Fluid Mud Systems in Order to Determine the Optimum Mud System for Alaskan Heavy-Oil-Multilateral Field Developments,” 2005.
  • R. Burton, E. Davis, R. Hodge, T. Gilbert, R. Stomp, N. Abdelmalek, M. Bailey: SPE 74365-MS, “Subsea Development of Shallow, Low-Pressure Gas Reservoirs Using High Performance Well Designs,” 2002.
  • C. Bennett, J. Gilchrist, E. Pitoni, R. Burton, R. Hodge, J. Troncoso, S. Ali, R. Dickerson, C. Price-Smith, M. Parlar: SPE 65140-MS, “Design Methodology for Selection of Horizontal Open-Hole Sand Control Completions Supported by Field Case Histories,” 2000.
  • R.C. Navarrete, H.L. Dearing, V.G. Constien, K.M. Marsaglia, J.M. Seheult and P.E. Rogers: SPE 67273, “Experiments in Fluid Loss and Formation Damage with Xanthan-Based Fluids While Drilling”.